$100 Off Electrical Panel or Subpanel Upgrades

Minimum job value may apply. Offer valid through Dec 31.

Electrical Panel Upgrades and Electrical Panel Replacement

Assurance Electrical Services provides safe and quality electrical panel replacement, installation, and maintenance. Call us today, and we’ll get you on the schedule!

Many homes in Prescott Valley have added electrical demand over time. New appliances, remodels, EV chargers, workshops, and HVAC upgrades can overload an older panel beyond its intended capacity. In other cases, the panel itself may be worn out or no longer meet current safety standards.

We help homeowners with:

  • Electrical panel upgrades in Prescott Valley for added capacity and safer performance

  • Electrical panel replacement for aging, damaged, or unreliable panels

  • 100A to 200A upgrades for modern power needs

  • Subpanel upgrades when you need more circuit space

  • Diagnosis for breaker trips, flickering lights, and uneven performance

If you are unsure whether you need an upgrade or a repair, we begin with a professional assessment and clearly explain your options.

Contact UsContact Us

Signs You May Need an Electrical Panel Upgrade

Homeowners often ask, “Should I upgrade my electrical panel?” Here are common signs that you may need an upgrade or electrical panel replacement:

  • Breakers trip frequently or will not reset reliably.

  • Lights flicker or dim when appliances turn on.

  • You hear crackling, buzzing, or popping sounds near the panel.

  • You notice a burning smell, scorch marks, or unusual heat at the panel.

  • Rust or corrosion is visible on breakers or inside the panel.

  • You are out of breaker space and using tandem breakers or extension cords to keep up.

  • Appliances do not run at full power, or circuits feel “weak.”

  • Your home has a fuse box, a split-bus panel, or a panel without a main breaker.

  • Your home either has a 60-amp electrical service or a faulty 100-amp electrical service.

  • You are planning a remodel, installing an EV charger, adding a hot tub, or installing additional 240V circuits.

  • You want to save more on your monthly electricity bill.
  • Lack of GFCIs (ground fault circuit interrupters) on outlets near water sources (sinks, tubs, dishwashers).
  • You have many extension cords.

If you notice heat, burning smells, or visible damage, it is best to call right away. Those symptoms can indicate a serious issue that should not wait.

100 Amp to 200 Amp Electrical Panel Upgrade in Prescott Valley

A 100-amp to 200-amp electrical panel upgrade in Prescott Valley is one of the most common upgrades for homeowners who need more capacity and room for additional circuits. It is often the right move when adding higher-demand equipment or updating an older electrical system to accommodate modern living.

A 200 amp upgrade can help support:

  • EV charging

  • HVAC upgrades

  • Hot tubs or spa equipment

  • Kitchen remodels and added appliances.

  • Workshops, garages, and added outlets

  • Home offices and upgraded lighting

We do not guess. We plan your upgrade based on what you want to power and what you may add in the next few years.

Load Planning Comes First

The best panel upgrade is the one that fits your home. Load planning ensures you receive the right capacity and a clear path for future upgrades.

During load planning, we look at:

  • Current electrical demand and panel condition

  • Breaker space and circuit layout

  • Future additions may include EV chargers, remodeling circuits, or adding appliances.

  • Whether a subpanel is a smart option or a full upgrade is the better choice

This approach helps you avoid overspending, prevents capacity issues later, and keeps your system safer and more reliable.

Permits and Inspection for Electrical Panel Upgrades in Prescott Valley

Most panel upgrades and electrical panel replacement projects require permits and inspection. In some cases, coordination with the utility may also be required, depending on the scope of work. We will explain what applies to your home and handle the permit and inspection process as part of the job so you are not left guessing.

Our goal is straightforward: to produce code-compliant work, document it properly, and complete it with a smooth inspection process.

Our Electrical Panel Upgrade Process

Competitors talk about “professional service,” but homeowners want to know what actually happens. Here is how we handle an electrical panel upgrade in Prescott Valley:

  • Assessment and consultation

    We inspect the panel, discuss symptoms, and review what you want your system to support.

  • Panel and capacity recommendations

    We clearly explain the options, including whether you need a 100A to 200A upgrade, a subpanel, or targeted repairs.

  • Code-compliant installation

    We complete the work cleanly and safely, with secure connections and organized wiring.

  • Testing and final walkthrough

    We test the system, clearly label the circuits, and walk you through the process.

  • Cleanup and support

    We leave the work area clean and remain available to answer any questions you may have after the job.

How Long Does an Electrical Panel Upgrade Take?

Most panel upgrades and replacements can often be completed in a single day, but timing depends on your existing setup and any required approvals. After the assessment, we will provide you with a clear schedule and set expectations before work commences.

What Happens If You Delay a Panel Upgrade?

Delaying a needed upgrade can lead to more frequent failures, damaged components, and increased safety risk. Overheating connections, corrosion, and unreliable breaker performance do not typically improve on their own. If your panel is showing warning signs, a professional inspection can help you identify what is urgent and what can be addressed later.

Why Hire Assurance Electrical for an Electrical Panel Upgrade?

When you hire an electrician for electrical panel upgrade work, you are trusting someone with the safety of your home.

Licensed and experienced electricians

We have a team of licensed expert professionals handling panel upgrades, replacements, installation, repair electrical panels, and diagnostics with attention to detail and code compliance.

Modern Electrical Equipment

As licensed and seasoned electricians, highly skilled, trained, and equipped with modern techniques and top-grade tools to do the job beyond expectations.

Superior Standards

We pride ourselves on our know-how, superior standard service quality, and time-tested techniques.

We work efficiently, and with integrity.

Professional Diagnosis of Your Electrical System

We are highly experienced in diagnosing issues in the electrical system. Our technicians have good problem-solving skills and can take necessary actions to address any problematic electrical components.

Schedule Electrical Panel Upgrades in Prescott Valley

Assurance Electrical Services offers electrical panel upgrades in Prescott Valley and surrounding communities, including Prescott and the Northern Arizona area.

Electrical Panel Upgrade FAQs

Can I upgrade my electrical panel myself?

A panel upgrade is not a DIY job because it involves hazardous service equipment, utility coordination, and work that is typically permitted and inspected. The town of Prescott Valley’s electrical permit packet and process call for documentation like proof of a valid contractor license, and it also includes an Owner-Builder option with required certifications. If something is done incorrectly, the risks include shock, arc flash, fire, and a failed inspection that delays restoring power. cms1files.revize.com+2American Legal Publishing+2

Not always. A 200-amp service is common when you are adding EV charging, larger HVAC equipment, a hot tub, a workshop, or new circuits for a remodel, but the right answer comes from a load calculation and planning for what you want to add next. Some homes can stay at 100 or 150 amps with smart circuit planning, a subpanel, or load management, while others truly need a service upgrade because the existing service is near its limit. A quick assessment can confirm what is practical and code-compliant.

A replacement usually means swapping an old, damaged, recalled, or failing panel with a new one at the same service size, while keeping the overall electrical capacity similar. An upgrade typically means increasing capacity or capability, like moving from 100 amps to 200 amps, adding more breaker spaces, or changing service equipment to support new loads. In many real projects, the work overlaps, since increasing amps often requires changes to the service entrance equipment, panel schedule, and inspection steps tied to the permit scope.

In most cases, yes. Prescott Valley’s electrical permit process is set up to review permit applications and verify compliance before issuing approval, and the town’s permit materials outline a specific submittal process for electrical work. For service changes and panel work, the town’s checklist calls for items like a one-line diagram and panel schedule when installing new or resized panels, plus inspection requirements. Permit rules and scope can vary by project, but panel upgrades are commonly permitted work.

Sometimes, but not automatically. If your current panel is overloaded, has damaged bus connections, or has failing breakers, upgrading or replacing it can reduce nuisance trips and improve reliability. Flickering and repeated tripping can also come from loose connections, a failing breaker on a single circuit, a neutral issue, or problems upstream at the service equipment. The safest approach is to diagnose the actual cause first, then decide whether a targeted repair or a full panel project is the correct fix for your home.

Panel size depends on your home’s calculated electrical demand and what you plan to add in the next few years. Common residential service sizes include 100, 150, and 200 amps, but breaker space matters too, since future circuits for EV charging, HVAC, and additions often require room. In Prescott Valley, service entrance and panel modifications may require documentation like panel schedules, and the town’s service entrance checklist notes working space and labeling requirements that can affect how the panel is selected and placed.

Request a Quote!

For a limited time, we’re offering huge discounts for an electrician in the Prescott area.